Moe's Performance
Proudly Sponsor's the Following Site's













  Home > 2009-2018 Ram 1500 & 2019-2021 Ram 1500 Classic > Camshafts and Ported Cylinder Heads >

Moe's Performance 5.7L VVT NSR (No Springs Required) Camshaft
Moe's Performance 5.7L VVT NSR (No Springs Required) Camshaft


 
Our Price: $699.00
Sale Price: $599.00
Savings: $100.00


Product Code: MP-VVT-NSR


Cam Phaser Limiter:


Custom Tuning:


Gasket and Bolt Kit:


Hemi Valve Spring Tool:


Lifters:


Pushrods:


Valve Springs:


Qty:  
Description
 
Moe's Performance High Performance Truck (NSR No Springs Required) cam was designed to be a budget friendly upgrade for the everyday driver that is looking for a big boost in tq in the low-mid range without the need for extra supporting upgrades such as Headers, Gears, or higher stall tq converters. Cam Phaser Limiter, Non MDS Lifters, and upgraded pushrods are required with this cam

While this cam is designed to work with the factory valve springs, we do recommend installing a fresh set of factory 5.7 springs if your engine has more than 50,000 miles.

The HPT NSR cam has a very noticeable chop at idle to give you that aggressive cam sound that we all love.

Duration @ .050: 210 Int/222 Exh
Lift: .525 Int/.525 Exh
Lobe Separation: 110
Powerband: 1200-6200 RPM's
Moe's Performance NSR Cam Idle

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 2014 ram cam/lifter replacement December 11, 2023
Reviewer: Brett Murphy from Rosenberg, TX United States  
Did all options available and decided to do the work myself after making a phone call to Moe’s, fast shipping, replaced cam, lifters, pushrods, phaser, replaced all gaskets, MDS delete, spark plugs and current logged my 2nd data run to send to Hemifever for the tune. Once I got back my first tune I was able to start and drive no problem, real good idle sound to it with the Corsa exhaust. Definitely would do again, the stock #5 lifter started shaving my cam down so this was a great upgrade, thanks!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Cam sounds good November 13, 2023
Reviewer: Donnie Mullenex from Durham, NC United States  
Quick shipping, quick responses from Matt, wont shop nowhere else

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Nice upgrade October 24, 2023
Reviewer: CB Brin from NORTH PRINCE GEORG, VA United States  
Went with this cam as it fit my setup better with a stock converter. ‘17 CC, lifted on 35’s. Nice bump in torque and pulls harder up top. It also has a nice chop at idle…same as the video. I opted to replace my orig springs as the motor had 89k on it at the time. Deleted MDS and new lifters and pushrods as well. Moe’s typical lightning fast shipping and his advice are always awesome!

Was this review helpful to you?