Moe's Performance
Proudly Sponsor's the Following Site's













  Home > 2009-2018 Ram 1500 & 2019-2021 Ram 1500 Classic > Cold Air Intakes >

LegMaker Carbon Fiber Mid-Tube 09-up Dodge Ram 5.7L Hemi Trucks
LegMaker Carbon Fiber Mid-Tube 09-up Dodge Ram 5.7L Hemi Trucks


 
Alternative Views:


Our Price: $279.99


Product Code: LMI-MID-TUBE


Ported Throttle Body:


Qty:  
Description
 
This intake tube will fit all 5.7 based 09' - 15' Ram 1500, 2500, 3500 Trucks. It utilizes the stock airbox for sealed air intake, but replaces the ugly and turbulent corragated stock intake tube with a nice, smooth 4" Carbon Fiber replacement. Kits include the mid tube, clamps, couplers, and an 18" IAT extension harness to relocate the IAT sensor into the intake flange of the OEM airbox.

Note: These pics do not show the factory engine cover installed, but the cover will work. It is a very tight fit, but will work for those that want to maintain the factory cover.

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 10 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 LegMaker Intake December 3, 2022
Reviewer: gary petrilli from aliquippa, PA United States  
Great product, and great service as usual. Can't go wrong with Moe's. Thanks

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Works and fits great. December 20, 2020
Reviewer: Danny N from MEDFORD, NY United States  
Install is super easy, and quick. the fitment is great, even with the factory engine cover. Not to mention it looks great! So much better than the ugly factory corrugated tube. Only complaint I have is I was not able to fit the clamp around the silicone coupler on the air box side. it was a 1/4" too small.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great Under Hood Aesthetic May 1, 2019
Reviewer: Steven P. from Allentown, PA United States  
Install was simple. It comes with a small clamp for the airbox side that's very tight but fits well. Very satisfied with the carbon tube. ZERO imperfections. Use a little lube for the couplers, makes a ton easier. Didn't feel a power increase. If anything maybe the response is better. I purchased for the look. I have a K&N filter and drilled out the bottom of airbox and put a 90 silicone coupler to get more cool air.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Legmaker Mid-Tube September 28, 2018
Reviewer: Brian Miller from McHenry, IL United States  
Took 3 weeks to get, but made to order.  Looks sweet under the hood, added a little sound with smooth airflow as well as throttle response.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Nice Upgrade July 20, 2015
Reviewer: Michael Jr. from Salem, MA United States  
This tube, full carbon fiber with serious SS straps just makes underneath the hood look custom and presentable.  I'm sure it adds HP as the stock tube which is almost fully ribbed definitely causes restriction for smooth air flow.  This tube certainly helps.  I put a K&N drop in filter in the stock box.  Not much noise in the engine compartment but my exhaust got louder, I have a SS straight through design, 3" cat back.  The installation was quick and fits very snug.  I also eliminated the HEMI engine cover as that will keep heat over the intake and plenum.  I like the stock box because it is designed to receive cold air through the fender ask front grill.  Dodge did a great job with this as well with the high flow Y pipe that comes stock.
Over all I'm very satisfied!!!! Hell yeah!!!!

Was this review helpful to you?

View All Customer Reviews