Moe's Performance
Proudly Sponsor's the Following Site's












Home > 2009-2018 Ram 1500 > Suspension > Suspension Lift Kits > 2WD Lift Kits
2WD Lift Kits
Sort By:
Page of 1
CST 1.5"-2.5" Front Lift Coils 2013+ Ram 1500 2WD
CST 1.5"-2.5" Front Lift Coils 2013+ Ram 1500 2WD
Our Price: $242.55

2013-2017 RAM 1500 2WD / 1.5-2.5" FRONT LIFT/LEVELING COILS
HEIGHT VARIES BY CAB & ENGINE SIZE*
OPTIMAL TIRE SIZE WOULD BE 32-33" TIRES ON 8" WIDE WHEELS WITH 5 INCHES OF BACK-SPACING, MINOR TRIMMING ON 33X13.5" WIDE TIRES!
CST 4" Lift Kit 2009-up Ram 1500 2WD
CST 4" Lift Kit 2009-up Ram 1500 2WD
Our Price: $854.19

THIS KIT PROVIDES 4" OF FRONT LIFT USING OUR AMERICAN MADE DUCTILE CAST-IRON LIFT SPINDLES AND CST STEEL BRAIDED BRAKE LINES. FOR THE REAR OF THE TRUCK THIS CST 4" KIT USES 1" BILLET SPACERS, KEEPING THE FACTORY REAR LOAD RATING & RIDE QUALITY.

KIT FEATURES:
-INCREASED GROUND & TIRE CLEARANCE.
-THE ONLY AMERICAN MADE, CAST-IRON LIFT SPINDLES AVAILABLE IN THE INDUSTRY.
-
NO WELDING REQUIRED.
-
ABILITY TO RETURN TRUCK TO STOCK.
-
MAINTAINS FACTORY LOAD RATING & REAR COIL RATE.
-
LEVEL STANCE ON MOST TRUCKS. (REAR KIT AVAILABLE IN 1 OR 1.5")
-
STEEL BRAIDED, DOT APPROVED FRONT BRAKE LINES.
-
DESIGNED TO FIT 33" TIRES W/ 9-10" WIDE WHEELS.
-
ALL PARTS MADE IN THE USA!

SUGGESTED WHEEL & TIRE SIZES:
-285 / 70 / 17 ON 8 OR 9” WIDE WHEELS
-
315 / 70 / 17 ON 8-9” WIDE WHEELS (MINOR TRIMMING REQUIRED)
-
35x12.5" ON 8-8.5" WIDE WHEELS (TRIMMING REQUIRED)
-
33x12.5” ON 9-10” WIDE WHEELS (MINOR TRIMMING REQUIRED)
-
ANYTHING LARGER, TALLER OR WIDER IS BEYOND CST RECOMMENDATIONS AND UP TO THE INSTALLER.
-
MAXIMUM BACKSPACING / 17" WHEELS IS 4.75" / 18" OR LARGER IS 5"
CST 5.5" Lift Kit 2013-up Ram 1500 2WD
CST 5.5" Lift Kit 2013-up Ram 1500 2WD
Our Price: $1,372.37

FIRST WE PROVIDE 4" OF LIFT USING OUR CAST-IRON LIFT SPINDLES THEN ADD LIFT COILS TO GET TO A TOTAL OF 5.5" OF FRONT LIFT. IN ADDITION TO THE FRONT SPINDLES AND COILS YOU MUST RUN THE CST STEEL BRAIDED BRAKE LINES INCLUDED IN THIS KIT. FOR THE REAR OF THE TRUCK THIS CST KIT USES 4" FABRICATED SPACERS AND A FABRICATED PAN-HARD BAR DROP, KEEPING THE FACTORY REAR LOAD RATING & RIDE QUALITY. LONGER REAR SHOCKS ARE REQUIRED BUT SOLD SEPARATE & AVAILABLE IN THE CST SHOCK LINE!
KIT FEATURES:
-INCREASED GROUND & TIRE CLEARANCE.
-
PARTS COVERED IN A HIGH QUALITY GLOSS BLACK POWDER COAT FINISH.
-
NO WELDING REQUIRED.
-
ABILITY TO RETURN TRUCK TO STOCK.
-
MAINTAINS FACTORY LOAD RATING & REAR COIL RATE.
-
LEVEL STANCE ON MOST TRUCKS. (FRONT KIT AVAILABLE IN 4 OR 5.5")
-
STEEL BRAIDED FRONT BRAKE LINES.
-
DESIGNED TO FIT 35" TIRES WITH 9" WIDE WHEELS.
-
ALL PARTS MADE IN THE USA!

SUGGESTED WHEEL & TIRE SIZES:
-
33x12.5” OR SIMILAR ON 9-10” WIDE WHEELS
-
315 / 70 / 17 ON 8-10” WIDE WHEELS
-
35” X12.5” ON 9 OR 10” WIDE WHEELS (MINOR TRIMMING REQUIRED)
-
ANYTHING LARGER, TALLER OR WIDER IS BEYOND CST RECOMMENDATIONS AND UP TO THE INSTALLER.
-
MAXIMUM BACKSPACING / 17" WHEELS IS 4.75" / 18" OR LARGER IS 5"
   
 
2WD Lift Kits