Moe's Performance High Performance Track (HPT) cam was designed for the daily drivers that want to use their truck everyday and still drag their friends at the track. This cam is not only going to give you tire shredding torque down low, but it also screams all the way up to 6400rpms for you racers. This cam has put 3 2dr 8sp Rams in the 11's N/A, 1 8sp 4dr 4wd in the 11.9's N/A, and 1 5sp 2dr in the 12.2's N/A. For the 5/6 speed trucks that are planning to take your truck to the track, we do recommend 3.92 or higher gears, a 2600+ stall tq converter, and Hemifever custom tuning to see the full potential of this cam. For 8sp trucks, we simply recommend a 3.55 or 3.92 gear and a Hemifever custom tune to get the best results at the track...Higher stall tq converter is not needed for this cam on the 8sp trucks, but it does not hurt either. Cam Phaser Limiter and Cam Install Kit are required with this cam. Non MDS Lifters and upgraded pushrods are not required, but they are highly recommended for best performance and reduced valvetrain tick.

The HPT cam has a mild idle...enough chop to know the cam is there, but not so rowdy that you cant drive it everyday.

Duration @ .050: 210 Int/222 Exh
Lift: .587 Int/.584 Exh
Lobe Separation: 111.5
Powerband: 1400-6400 RPM's