Moe's Performance
Proudly Sponsor's the Following Site's

  Home > 2009-2018 Ram 1500 > Camshafts and Ported Cylinder Heads >

Moe's Performance 5.7L VVT HPS (High Performance Street) Camshaft
Moe's Performance 5.7L VVT HPS (High Performance Street) Camshaft

Our Price: $819.00
Sale Price: $799.00
Savings: $20.00

Product Code: MP-VVT-HPS

Cam Install Kit:

Cam Phaser Limiter:

Custom Tuning:

Hemi Valve Spring Tool:


Moe's Performance High Performance Street (HPS) cam was designed for the daily drivers that want to go out and have some fun with their truck. This cam is not only going to give you tire shredding torque down low, but it also screams all the way up to 6200rpms for you racers. The fastest N/A 4th Gen Crew Cab ram truck is running this cam, and put down a 12.36 pass in the 1/4 mile. For the 5/6 speed trucks that are planning to take your truck to the track, we do recommend 4.10 or higher gears, a 3000+ stall tq converter, and Hemifever custom tuning to see the full potential of this cam. For 8sp trucks, we simply recommend the 3.92 gears and a Hemifever custom tune to get the best results at the track. Cam Phaser Limiter and Cam Install Kit are required with this cam. Non MDS Lifters are not required, but they are highly recommended for best performance and reduced valvetrain tick.

The HPS cam does not have a very aggressive idle. If you are wanting a cam with a more choppy idle, then take a look at our HPT cam.

Duration @ .050: 210 Int/218 Exh
Lift: .587 Int/.580 Exh
Lobe Separation: 112
Powerband: 1400-6200 RPM's
2013 Crew Cab - 12.68 @ 105.44MPH N/A with Moe's HPS Cam

Average Rating: 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
December 24, 2017
Reviewer: Carlos Perez from Cape Coral, FL United States  

Was this review helpful to you?

  1 of 1 people found the following review helpful:
13 ram 1500 5.7L August 5, 2016
Reviewer: Brandon Johnson from Cibolo, TX United States  
install took 5 days at leisurely pace and maybe 6 or so hrs a day. the tool for the springs is a must. first time i ever did springs and it took about 90 min for all 16. cam does not really change the idle made mine a bit more choppy. the truck defiantly shits and gets now. noticeable power gain. for the 2K i spent im extremely happy with the outcome.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
Excellent as Always March 2, 2016
Reviewer: Dan Goodman from Moody, TX United States  
Matt and group at Moe's are always available to answer your questions, make educated suggestions and forever stands behind their service.


Was this review helpful to you?