Moe's Performance
Proudly Sponsor's the Following Site's













  Home > 2009-2018 Ram 1500 > Cold Air Intakes >

LegMaker Carbon Fiber Mid-Tube 09-up Dodge Ram 5.7L Hemi Trucks
LegMaker Carbon Fiber Mid-Tube 09-up Dodge Ram 5.7L Hemi Trucks


 
Alternative Views:


Our Price: $224.99

Product Code: LMI-MID-TUBE


Ported Throttle Body:


Qty:  
Description
 
This intake tube will fit all 5.7 based 09' - 15' Ram 1500, 2500, 3500 Trucks. It utilizes the stock airbox for sealed air intake, but replaces the ugly and turbulent corragated stock intake tube with a nice, smooth 4" Carbon Fiber replacement. Kits include the mid tube, clamps, couplers, and an 18" IAT extension harness to relocate the IAT sensor into the intake flange of the OEM airbox.

Note: These pics do not show the factory engine cover installed, but the cover will work. It is a very tight fit, but will work for those that want to maintain the factory cover.

Average Rating: 4.5 of 5 Total Reviews: 6 Write a review »

  0 of 0 people found the following review helpful:
 
Nice Upgrade July 20, 2015
Reviewer: Michael Jr. from Salem, MA United States  
This tube, full carbon fiber with serious SS straps just makes underneath the hood look custom and presentable.  I'm sure it adds HP as the stock tube which is almost fully ribbed definitely causes restriction for smooth air flow.  This tube certainly helps.  I put a K&N drop in filter in the stock box.  Not much noise in the engine compartment but my exhaust got louder, I have a SS straight through design, 3" cat back.  The installation was quick and fits very snug.  I also eliminated the HEMI engine cover as that will keep heat over the intake and plenum.  I like the stock box because it is designed to receive cold air through the fender ask front grill.  Dodge did a great job with this as well with the high flow Y pipe that comes stock.
Over all I'm very satisfied!!!! Hell yeah!!!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great looks - Tough Fit May 4, 2015
Reviewer: Shannon from Virginia, United States  
The finished product looks great and it'll be interesting to see if it nets any gains in the long run with it being slightly larger than the stock mid-tube and a straighter path.  However, I was not all that thrilled with the install.  

The directions show you have to relocate the mass air flow outside the air filter.  I wasn't a fan of this idea so I drilled a hole in the 90 flex instead (similar to stock).  another problem I had was the small clamp it came with was too small to fit around the filter box outlet.  The flex seemed pretty snug so I just left it without a clamp.  

In all a decent product and looks real good, just more of a pain to install than it looks.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Nice intake August 6, 2014
Reviewer: Cecil Flynn from Lloydminster, AB Canada  
Great looking kit.

Fitment seemed a little off but I was putting It in to my amp ram air box so I expected an issue with mating 2 different manufactures .
I wasn't sure what to do with the sensor, kit showed to move it , but I think that is for the stock air box and this kit, mine I put in the elbow Rite before tb. And do not drill the 13/16 hole like they say. Pull out the caliper like I did and measure grommet In case their sending out different sizes.

I'd buy again.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
LegMaker Carbon Fiber Mid-Tube January 16, 2014
Reviewer: Darren Bernd from Fort Worth, TX United States  
Great product and extremely fast delivery! Thanks!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Nice custom look and better flow May 8, 2013
Reviewer: Kyle Andress from Corning, NY United States  
This is a great product. Get's rid of that stock look and really flows some air. Fit's great!

Was this review helpful to you?

View All Customer Reviews