Moe's Performance
Proudly Sponsor's the Following Site's












Home > 2009-2018 Ram 1500 > Cold Air Intakes
Sort By:
Page of 1
S&B Filter Wrap for 2003-2016 Dodge Ram 1500, 2500, 3500 5.7L Hemi Intake Kits
S&B Filter Wrap for 2003-2016 Dodge Ram 5.7L Hemi Intake
Our Price: $29.95

Prolong the life of your air filter with this S&B filter wrap.  Not only will the wrap help extend the life of your air filter, but it also offers an extra layer of protection for those of you that drive in dusty conditions or offroad.  

-Fits S&B filters Part #s KF-1056 and KF-1056D used on the 2003-2016 Dodge Ram 5.7L Hemi intake kits
S&B Precision II Cleaning & Oil Kit (Red)
S&B Precision II Cleaning & Oil Kit (Red)
Our Price: $29.95

Enough to service most filters 3 times.  Re-engineered oil applicator is more precise and easier to apply.

Significantly more cleaner. New finger friendly trigger applicator.

Reusable box. Keeps things neat & organized between cleanings.

It's the best way to service your filter yet.
LegMaker Carbon Fiber Mid-Tube 09-up Dodge Ram 5.7L Hemi Trucks
LegMaker Carbon Fiber Mid-Tube 09-up Dodge Ram 5.7L Hemi Trucks
Our Price: $224.99

This intake tube will fit all 5.7 based 09' - 15' Ram 1500, 2500, 3500 Trucks. It utilizes the stock airbox for sealed air intake, but replaces the ugly and turbulent corragated stock intake tube with a nice, smooth 4" Carbon Fiber replacement. Kits include the mid tube, clamps, couplers, and an 18" IAT extension harness to relocate the IAT sensor into the intake flange of the OEM airbox.

Note: These pics do not show the factory engine cover installed, but the cover will work. It is a very tight fit, but will work for those that want to maintain the factory cover.
LegMaker Frank IV Truck Intake 2009-17 Dodge Ram 5.7L Hemi
LegMaker Frank IV Truck Intake 2009-17 Dodge Ram 5.7L Hemi
Our Price: $264.99

o Carbon Fiber construction
o Unique fabrication process resulting in smooth inner surface to ensure smooth airflow
o 4” diameter carbon fiber tube with 45* bend to allow for placement of filter over air intake opening in fender well
o S&B Filter with 8 layer protection (oil type)
o Hi-temp rubber coupler
o High quality “T”-bolt band clamps
o Available to fit both stock and ported throttle bodies
o Drilled for IAT sensor
o Oil breather filter (red,blue,silver)
o All necessary hardware and instruction for DIY installation
S&B Cold Air Intake 2009-2017 Ram 1500/2500/3500 5.7L Hemi
S&B Cold Air Intake 2009-2017 Ram 1500/2500/3500 5.7L Hemi
Our Price: $299.00

S&B Filters has now released a new enclosed filter intake system that offers the best in performance and filtration for all 2009-2017 Ram 1500, 2500, and 3500 5.7 trucks. With an OEM fit and finish, this system offers both the looks and performance gains that you expect from a quality cold air intake kit.

-Fits 2009-2017 Ram 1500/2500/3500 5.7L Hemi Trucks
Vararam Air Grabber Intake 2009-2018 Dodge Ram 5.7L Hemi
Vararam Air Grabber Intake 2009-2018 Dodge Ram 5.7L Hemi
Our Price: $369.00
Sale Price: $319.00
Savings: $50.00

Its here the all new "VR Air Grabber Ram Air Induction System" for all 2009-2018 Dodge Hemi trucks!

-Performance gains of 1/2 second off your 0-60mph times
-3 tenths and +3mph through the 1/4 mile!
-No tuning required
-Works with all aftermarket tuners Installs in 10-15 min
AEM Brute Force Intake 09-2012 Dodge Ram 5.7L Hemi - Painted
AEM Brute Force Intake 09-2012 Dodge Ram 5.7L Hemi - Painted
Our Price: $383.99

AEM Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter. AEM intake systems are designed, tuned, and dyno-tested to fit specific cars and trucks. These kits usually include an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance while allowing easy oil-free cleaning. Most AEM intake systems use mandrel-bent aluminum intake tubes, powder coated heat shields, and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. AEM manufactures a variety of intake kit styles including short ram intakes, cold air intakes, dual-chamber intakes, Brute Force intakes for trucks and SUV's,

Estimated Horsepower Gain: 8.00 HP @ 4700 RPM
Volant Cold Air Intake 09-2012 Dodge Ram 5.7L Hemi
Volant Powercore Cold Air Intake 09-2012 Dodge Ram 5.7L Hemi
Our Price: $389.90

Engine: 5.7L

Year: 09-12

The 5.7L is Dodges' most venerable work horse engine. When we designed this kit we knew this engine is being used for all kinds of things. So we made sure to give it the best design and offer a scoop for even more power. You can expect about 16 horsepower with the base kit.
Moe's Performance Carbon Fiber Cold Air Intake 2009-2018 Ram 1500 5.7 Hemi
Moe's Performance Carbon Fiber Cold Air Intake 2009-2018 Ram 1500 5.7
Our Price: $399.00

**Please allow 3-5 days build time for this kit**

Moe's Performance has teamed up with Legmaker Intakes to offer a carbon fiber intake that not only looks amazing, but gives the sound and performance that we all expect from the Hemi Motor. This kit is composed of hand laid 4" carbon fiber tubing which dissipates heat quicker than both plastic and metal. This intake also positions the air filter down behind the passenger headlight in front of, and away, from the heat generated under the hood.

Another added bonus is that this kit is very easy to adapt to a true track intake setup for the 1/4 mile racers. Simply relocate the coolant overflow bottle, and you have a direct opening to mount a Ram air scoop in the front grille.

Kit Includes:

-4" Diameter Carbon Fiber Tubing
-S&B Oiled Filter (Red or Blue)
-Oil Breather Filter (Red or Blue)
-4 Ply Silicone Couplers
-T Bolt Style Band Clamps
AEM Brute Force Intake 09-2012 Dodge Ram 5.7L Hemi - Polished
AEM Brute Force Intake 09-2012 Dodge Ram 5.7L Hemi - Polished
Our Price: $418.99

AEM Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter. AEM intake systems are designed, tuned, and dyno-tested to fit specific cars and trucks. These kits usually include an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance while allowing easy oil-free cleaning. Most AEM intake systems use mandrel-bent aluminum intake tubes, powder coated heat shields, and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. AEM manufactures a variety of intake kit styles including short ram intakes, cold air intakes, dual-chamber intakes, Brute Force intakes for trucks and SUV's, and Brute Force HD intakes for diesel applications.

Estimated Horsepower Gain: 8.0 HP @ 4700 RPM