View Cart
0 Items: $0.00
My Account / Order Status
Dodge Ram
Jeep Grand Cherokee
Clearance Corner
Moe's Performance
Proudly Sponsor's the Following Site's
Home
>
2019-2022 Ram 1500 (New Body Style)
>
Camshafts and Ported Cylinder Heads
Sort By:
Price: Low to High
Price: High to Low
Most Popular
Title
Manufacturer
Newest
Oldest
Availability
10 per page
20 per page
40 per page
60 per page
100 per page
Page
of 1
Moe's Performance 5.7L VVT HPT (High Performance Truck) Camshaft
Our Price: $699.00
Sale Price: $599.00
Savings: $100.00
Moe's Performance High Performance Truck (HPT) cam was designed for the daily drivers that want to use their truck everyday and still drag their friends at the track. This cam is not only going to give you tire shredding torque down low, but also screams up to 6000rpms for you racers. This cam has put numerous 8sp Rams in the 11's N/A and many 5/6sp Rams in the low 12's N/A. The fastest N/A 5/6sp Ram also runs this cam and has run a best of 11.99 so far in the 1/4 mile. For the 5/6 speed trucks that are planning to take your truck to the track, we do recommend 3.92 or higher gears, a 2600+ stall tq converter, and Hemifever custom tuning to see the full potential of this cam. For 8sp trucks, we simply recommend a 3.55 or 3.92 gear and a Hemifever custom tune to get the best results at the track...Higher stall tq converter is not needed for this cam on the 8sp trucks, but it does not hurt either. Cam Phaser Limiter, upgraded valve springs, Non MDS Lifters, and upgraded pushrods are required with this cam.
The HPT cam has a mild idle...enough chop to know the cam is there, but not so rowdy that you cant drive it everyday.
Duration @ .050: 210 Int/222 Exh
Lift: .587 Int/.584 Exh
Lobe Separation: 111.5
Moe's Performance 5.7L VVT HPT+ (Track PLUS) Camshaft
Our Price: $699.00
Sale Price: $599.00
Savings: $100.00
Moe's Performance High Performance Track PLUS (HPT+) cam was designed for the everyday drivers that also want to put up impressive times at the dragstrip. This cam has put numerous N/A 5.7 Ram trucks in the mid-high 11's in the 1/4 mile. While this is a beast of a cam for the Naturally Aspirated guys, it was also designed to work very well with nitrous as well. Hemifever's 2017 has also gone 11.01 @ 122.03mph so far on a 150 shot.
For the 5/6 speed trucks that are planning to take your truck to the track, we do recommend 4.56 gears, a 3400 stall tq converter, and Hemifever custom tuning to see the full potential of this cam. For 8sp trucks, we recommend a 3.55 or 3.92 gear, 2800+ stall tq converter, and a Hemifever custom tune to get the best results at the track.
Cam Phaser Limiter, Valve Springs, Pushrods, and Non MDS Lifters are required with this cam.
The HPT+ cam has a very noticeable chop at idle when paired up with longtube headers and a good tune.
Duration @ .050: 214 Int/224 Exh
Lift: .590 Int/.585 Exh
Lobe Separation: 112 LSA
Moe's Performance 5.7L VVT HPT MAX (MAX Effort) Camshaft
Our Price: $699.00
Sale Price: $599.00
Savings: $100.00
Moe's Performance HPT MAX cam was designed for the guys who are chasing their fastest ET at the track while still wanting to use their truck as a daily driver as well. This cam is currently in 2 of the 3 5.7 SBE Ram trucks to run 10s in the 1/4 mile Naturally Aspirated without boost or nitrous. Sam Raegan has been a best of 10.67, and Rick Spillman ran a best of 10.81 with this cam.
For the 5/6 speed trucks that are planning to take your truck to the track, we do recommend 4.56 gears, a 4000 stall tq converter, and Hemifever custom tuning to see the full potential of this cam. For 8sp trucks, we recommend a 3.55 or 3.92 gear, 3600-4000 stall tq converter, and a Hemifever custom tune to get the best results at the track.
Cam Phaser Limiter, Cam Install Kit, Non MDS Lifters, and upgraded pushrods are required with this cam.
The HPT MAX cam has a very noticeable chop at idle when paired up with longtube headers and a good tune.
Duration @ .050: 218 Int/228 Exh
Lift: .594 Int/.589 Exh
Lobe Separation: 112 LSA
Moe's Performance 5.7L VVT NSR (No Springs Required) Camshaft
Our Price: $699.00
Sale Price: $599.00
Savings: $100.00
Moe's Performance High Performance Truck (NSR No Springs Required) cam was designed to be a budget friendly upgrade for the everyday driver that is looking for a big boost in tq in the low-mid range without the need for extra supporting upgrades such as Headers, Gears, or higher stall tq converters. Cam Phaser Limiter, Non MDS Lifters, and upgraded pushrods are required with this cam
While this cam is designed to work with the factory valve springs, we do recommend installing a fresh set of factory 5.7 springs if your engine has more than 50,000 miles.
The HPT NSR cam has a very noticeable chop at idle to give you that aggressive cam sound that we all love.
Duration @ .050: 210 Int/222 Exh
Lift: .525 Int/.525 Exh
Lobe Separation: 110
MMX 5.7L VVT NO TUNE REQUIRED NON-MDS Camshaft
Our Price:
$619.60
No Tune Required!
No Springs Required!
No Phaser Limiter Required!
No Pushrod Upgrade Required!
**DESIGNED FOR NON MDS LIFTERS ONLY** DO NOT USE THIS CAMSHAFT WITH MDS LIFTERS. If you would like to purchase a version of this cam that will work with MDS Please see our NTR MDS 5.7 Camshaft.
Introducing our 5.7 VVT HEMI NO TUNE REQUIRED NSR NON MDS Performance NA Camshaft! This camshaft is a true drop in, no tune required camshaft upgrade for your 5.7 VVT Hemi. does not require a Phaser limiter. MMX has spent countless hours of R&D on perfecting this camshaft and making it work with factory components. This camshaft has added 30 Wheel HP to their 2019 Ram 1500 5.7 Laramie, as well as a noticeable increase in low end torque. This cam works with the factory engine calibration.
Modern Muscle 5.7L Hemi CNC Ported Eagle Heads
Our Price:
$2,322.98
Unlike the Competition, Modern Muscle does not offer stages to their heads...they simply offer the best product possible.
Our 5.7L Hemi Eagle Heads come standard with the following...
-Proprietary CNC porting of intake and exhaust ports
-Hand blending of bowls
-Multi-angle valve job
-New PSI 1511 valve springs
-New seals, shims, and Moly retainers
-Cleaned, deburred, and assembled
If you are unsure of the available options, please call us so that we can help you choose the most appropriate components for your application.
**There is a refundable core charge for this product. If you wish to send in your heads for porting to avoid the core charge, simply select that option in the drop box above.**
CORE RETURNS MUST BE SENT BACK WITHIN 30 DAYS OF RECEIVING NEW HEADS
